"Just Look for the Red"
Irrigation Installation, Maintenance, and Repair Services
When Traditional Irrigation is what you are looking for we use only the best most efficient products on the market. Water Conservation is our end goal all while beautifying and maintaining your lawn and bed areas! When using traditional spray heads and rotors we choose Hunter Industries products Including the new and innovative MP Rotator! This has been a revolutionary breakthrough in the water conservation market and also really works well when water pressure is an issue!

In our world of ever changing water restrictions one way of being able to water even during periods of restriction is by having sub-surface drip irrigation. This is commonly seen used over the past few years in beds more and more often. Many people are unaware that they are also able to use this in their lawn areas as well! It is a wonderful choice and we at TLC believe it is the way of the future. It solves so many traditional sprinkler problems. IE: damage to heads by lawnmowers and equipment, overspray on surfaces, windows, fences, and brick etc... When installing in the lawn areas we believe the best product on the market is Netafim. Below is a clip from one of their brochures:

Techline CV
Integral pressure-compensating, continuously self-cleaning, check valve and anti-drain dripper.
Give us a Call
  • Sub-surface or on-surface installations 
  • Slopes 
  • High wind areas 
  • Areas subject to vandalism 
  • Curved, narrow, and unshaped planting areas 
  • Turf, flower beds, trees, and shrubs 
  • Green walls 
  • Sport turf, tennis courts, and golf courses 
  • High traffic or high liability areas 
  • Raised planters
  • Broadest choice of dripper flow rates: 1.0, 1.6, 2.3 l/h. 
  • Dripper spacings: 0.3, 0.4, 0.5, 1.00 m (Other dripper spacing available upon request). 
  • Pressure-compensating range: 1.0-4.0 bar. 
  • Anti-drain mechanism. 
  • Shut-off pressure 0.14 bar. 
    • Anti-siphon mechanism . 
    • Maximum system pressure: 4 bar . 
    • Recommended filtration: 120 mesh . 
    • Dripperline OD (outside diameter) mm: 16.1 . 
    • Dripperline ID (inside diameter) mm: 13.7. 
    • Coil length: 25, 50, 100, 400 m.